PSI-Acid Specialty Acid Resistant Membrane Element

PSI-Acid Specialty Acid Resistant Membrane Element

Send Inquiry

PSI MEMBRANE® PSI-Acid specialty Acid Resistant Membrane incorporating innovative Thin Film Nanocomposite (TFN) acid-resistant membrane sheets and unique acid-resistant materials. They have anti-fouling, high flux, high pressure resistance, and good acid resistance properties.They can achieve metal concentration in acidic solutions as low as pH 1, and can also be used for acid purification and recovery. They are suitable for removing large molecular impurities in acid solutions and can operate stably in acidic environments for more than 12 months.

 

Product Parameter

 

Product

Active Area

ft²(m²)

Feed Spacer Thickness(mil)

Permeate Flow Rate GPD(m³/d)

Stabilized Salt Rejection(%)

PSI-Acid-NF98-8040 400 (37.2)

34

9000 (34.1)

98

 

1. Permeate flow rate and stabilized salt rejection were based on the following standard test conditions: 2000 ppm MgSO4, 580 psi (4.01 MPa), 77 ℉ (25 ℃), and 15% recovery.

2. The variation range of permeate flow rate is +/-15%.

 

Operating Condition

 

Operating Limits

Unit

Value

Maximum operating pressure

psi(MPa)

1200(83)

Maximum feed water temperature

°F(°C)

122(50)

Maximum pressure drop

bar

1

Continuous operation pH range

 

1-10

Cleaning pH range

 

0-13

Maximum feed water SDl15

 

5

Maximum influent turbidity

ntu

1

Maximum residual chlorine concentration of influent

ppm

<0.1

Hot Tags: psi-acid specialty acid resistant membrane element, China psi-acid specialty acid resistant membrane element manufacturers, suppliers, factory, selective Special Membranes membrane, custom Special Membranes module, selective Special Membranes solution, ultrafiltration Special Membranes module, selective Special Membranes element, custom Special Membranes filter

Send Inquiry