Specific Materials and Functions of Reverse Osmosis Membranes
Nov 12, 2026
Leave a message
Today, let's explore reverse osmosis (RO) membranes-specifically their core materials and functions. As the central component of any water treatment system, an RO membrane is often evaluated by users solely based on operational metrics like salt rejection rates or permeate flow. However, this overlooks the specialized roles played by the various layers that make up the membrane. A high-quality RO membrane is not composed of a single material; rather, it is a composite of multiple polymer layers. Each layer serves a distinct purpose, working in tandem to allow the selective passage of water molecules under high pressure while effectively blocking impurities such as salt ions, colloids, and microorganisms.
Currently, the mainstream products on the market are based on thin-film composite (TFC) polyamide membranes, with more advanced versions utilizing a thin-film nanocomposite (TFN) structure. These membranes consist of three distinct layers: a non-woven fabric support layer at the base, a porous polysulfone intermediate layer, and a functional polyamide desalination layer on the surface.

The bottom layer consists of a polyester non-woven fabric, which serves as the mechanical substrate for the membrane. This polyester material is highly tough and resistant to stretching; it has a thickness of approximately 120–150 microns and does not participate in the filtration or separation process itself. Its primary function is to withstand the high pressures present during the operation of a reverse osmosis system, preventing the membrane from tearing or deforming during the spiral-winding process or under high-pressure conditions. It provides a stable support for the overlying materials, ensuring the overall mechanical strength of the membrane element.
The intermediate layer consists of microporous polysulfone cast onto a non-woven fabric, serving as a porous transitional support layer. Polysulfone features an abundant microporous structure with pore sizes in the range of tens of nanometers. It does not reject salts; rather, its primary function is to provide a smooth, uniform substrate for the formation of the top desalination layer. Simultaneously, it facilitates the smooth downward permeation of water molecules and distributes the separation pressure-exerted on the top layer-down to the underlying non-woven fabric, thereby preventing the ultra-thin desalination layer from being punctured or damaged under high pressure.
The most critical component is the top layer: a cross-linked aromatic polyamide desalination layer, measuring only about 200 nanometers in thickness. Produced via an interfacial polymerization process, this is the functional layer that actually performs the water treatment separation. It forms a dense, polymeric network structure with pore sizes smaller than 1 nanometer, allowing only water molecules to pass through. Through size exclusion and charge repulsion, it rejects calcium and magnesium ions, heavy metal salts, colloids, bacteria, viruses, and most organic matter, achieving a salt rejection rate of over 99%. In TFN (thin-film nanocomposite) membranes, nanomaterials are incorporated into this layer to enhance membrane flux while maintaining a high salt rejection rate. This also improves anti-fouling performance, resulting in a water flux approximately 30% higher than that of traditional TFC (thin-film composite) membranes, which in turn reduces the energy consumption of the system.

In addition to the membrane substrate, a complete reverse osmosis (RO) membrane element comprises several auxiliary components, including feed spacers (flow-directing mesh), permeate carrier fabric, a central permeate collection tube, and sealing adhesive. The feed spacers, typically made of polypropylene, dictate the flow pattern of the incoming water; their wide-channel design helps mitigate the accumulation of contaminants. The central collection tube-usually constructed from ABS-serves to gather and transport the purified permeate. The sealing adhesive ensures that the various chambers within the membrane roll remain isolated, preventing cross-contamination between the feed water and the permeate-a factor that directly influences the operational stability of the entire membrane element.
The materials used determine the specific applications for which a membrane element is suited. Standard polyamide membranes are appropriate for the treatment of conventional surface water and groundwater. Conversely, specialized RO membranes-modified for enhanced resistance to oxidation, acids, and bases-are designed for complex industrial wastewater or water containing oxidizing agents, and they can withstand a broader pH range during cleaning processes. Proshare's innovative "Pro" series of RO membranes utilize TFN (Thin-Film Nanocomposite) technology, offering a balance of high salt rejection, high flux, and fouling resistance. These membranes are suitable for a wide range of operating conditions, including low-pressure commercial applications, industrial pure water production, and seawater desalination. They can be customized based on specific feed water quality, ensuring long-term, stable operation for water treatment projects.
Send Inquiry





