PSI-Base Specialty Alkali Resistant Membrane Element

PSI-Base Specialty Alkali Resistant Membrane Element

Send Inquiry

PSI MEMBRANE® PSI-Base Specialty Alkali Resistant Membrane incorporating innovative Thin Film Nanocomposite (TFN) alkali-resistant membrane sheets and unique alkali-resistant materials. They have anti-fouling, high flux, high pressure resistance, and good alkali resistance properties.They can achieve concentration of cellulose, hemicellulose, papermaking fibers, and other compounds in alkaline solutions of pH 12, and can also be used for alkali purification and recovery. They can maintain high flux and stable operation for more than 12 months in alkaline environments.

 

Product Parameter

 

Product

Active Area

ft²(m²)

Feed Spacer Thickness(mil)

Permeate Flow Rate GPD(m³/d)

Stabilized Salt Rejection(%)

PSI-Base-NF98-8040 400 (37.2)

34

13000 (49.2)

98

 

1. Permeate flow rate and stabilized salt rejection were based on the following standard test conditions: 2000 ppm MgSO4, 580 psi (4.01 MPa), 77 ℉ (25 ℃), and 15% recovery.

2. The variation range of permeate flow rate is +/-15%.

 

Operating Condition

 

Operating Limits

Unit

Value

Maximum operating pressure

psi(MPa)

1200(83)

Maximum feed water temperature

°F(°C)

140(60)

Maximum pressure drop

bar

1

Continuous operation pH range

 

3-12

Cleaning pH range

 

2-13

Maximum feed water SDl15

 

5

Maximum influent turbidity

ntu

1

Maximum residual chlorine concentration of influent

ppm

<0.1

 

Hot Tags: psi-base specialty alkali resistant membrane element, China psi-base specialty alkali resistant membrane element manufacturers, suppliers, factory, custom Special Membranes solution, Alkali resistant membrane, chemical resistant Special Membranes filter, organic solvent Special Membranes element, Acid resistant membrane, ultrafiltration Special Membranes module

Send Inquiry