Ultra-Low Pressure Membrane Element:Low Pressure Work Solution

Jul 23, 2025

Leave a message

While the demand for water recycling in industrial production is rising, the development of traditional high-pressure membranes is constrained by high energy consumption and high cost. Proshare uses the latest thin-film nano-composite (TFN) technology to create the Ultra-Low Pressure Membrane Element, which achieves stable and sustained high-throughput operation at ultra-low working pressure. Ultra-Low Pressure Membrane Element increases the capacity by at least 50% and reduce the cost by more than 30% compared with the traditional process, providing strong support for the environmental protection fields such as textile wastewater, waste leachate, high salt and high COD wastewater, and so on.

 

psitfn-1

 

Thin-Film Nanocomposites (TFN) Technology

 

Proshare's latest development, the Ultra-Low Pressure Membrane Element, is changing the perception of conventional water treatment with the latest thin-film nanocomposite (TFN) technology. By embedding nano-scale functional materials into the membrane structure to form a highly selective separation layer, the technology not only increases the hydrophilicity of the membrane surface by 60%, but also increases the pollutant retention rate to 99.4%. The Ultra-Low Pressure Membrane Element has been tested by authoritative organizations, and its anti-pollution ability is 3 times higher than that of traditional process membranes, and its service life has been extended to more than 5 years, which provides a brand new solution for the efficient use of water resources around the world.

 

High Flux Flow at Low Pressure

 

The Ultra-Low Pressure Membrane Element maintains good water throughput in low pressure environments. With a low operating pressure of <1MPa, the Membrane Element achieves a high throughput of 180L/(m²/h), a 60% increase in efficiency and a 45% reduction in energy consumption compared to traditional membrane elements. Hundreds of companies around the world are now using the Ultra-Low Pressure Membrane Element, bringing a new era of low pressure and high efficiency to cities.

 

cost reduction

 

In the face of the high operating costs of industrial water treatment, the Ultra-Low Pressure Membrane Element is the key to solving the problem. With its ultra-low pressure design and high flux performance, the membrane element reduces energy consumption by 45% compared to traditional membrane equipment, and with a service life of up to 5 years, it significantly reduces the frequency of replacement. According to actual calculations, the introduction of Ultra-Low Pressure Membrane Element in a water plant with a daily water supply capacity of 100,000 tons reduces annual operating costs by more than $300,000, significantly easing the economic pressure on urban water supply.

 

psitfn-2

 

Proshare is focused on realizing the development and production of third generation nanocomposite film-based high-end reverse osmosis nanofiltration membranes, TFN, which has seen rapid growth over the last 10 years. We have several high quality membrane production lines, including raw material handling, membrane casting, phase conversion and post-processing that are critical to consistency and performance to improve performance characteristics such as flux rates and retention efficiencies. The Ultra-Low Pressure Membrane Element is the culmination of the latest technologies. It is revolutionizing the wastewater treatment and other related environmental fields with significant cost reduction benefits.

Send Inquiry